Index

3G5D shield, 1

Acceleration, 23
    Disabling, 4
Advance, see JKN Advance
Auto-leveling, 67
    Adjust, 8
    False probe hits, 9
    Max variance, 10

Build date, 11
Buttons, see Keys
Buzzer, 13

Calibration
    Box, 1415
    Dual extrusion, 1617, 1819
    Slicing profile, 20
Configuration
    Initial, 2122
Conveyor, stopping, 23
Cooling fan, 24, 25
Corner ringing, 26
Custom printer, 27

Deprime, 28
    On travel, 29
Ditto printing, 30

EEPROM, 31
    Restoring, 32
    Saving, 33
eeprom_dump.bin, 34
Errors
    SD card not present, 35
    Unable to read this SD card format..., 36
Extruder count, 37

Factory defaults, 38
Filament
    Loading, 3940, 41
    Odometer, 42
    Unloading, 43
    Usage, 44, 45, 46, 47
Filament jam detector, 48
Firmware
    Identifying, 49
    Installing, 50
    Removing, 51
    Types, 52
Flashcard, see SD card

Gcode
    M126, 54
    M127, 55
    M131, 56
    M132, 57
    M320, 58
    M321, 59
    M322, 60
Gen 3, 61
Gen 4, 62
GPX, 63, 64

Heated build platform
    Enabling, 65
    Preheating, 66
Home offsets, 67, 6869
    Z, 70
Homing, 71
    Wrong direction, 72

Identifying firmware, 73
Installing, 74, 75, 7677

JKN Advance
    K, 78
    K2, 79
Jogging, 80

Keys
    Center, 81
    Down, 82
    Keypad, 83
    Left, 84
    Right, 85
    Up, 86

LCD
    Solid bars, 87
Leveling, 8889, 90
Lighting, 91

Mailing list, 92
MakerWare
    Conveyor, 93
    EEPROM maps, 94
Memory usage, 95
Menus
    EEPROM, 96
    General settings, 97
    Home offsets, 98
    Jogging, 99
    Main, 100
    Navigating, 101
    Pause, 102
    Preheat, 103
    Preheat settings, 104
    Print from SD, 105
    Print menu, 106
    Profile, 107
    Toolhead offsets, 108
    Utilities, 109
MightyBoard, 110

New releases, 111

Offsets
    Home, 112, 113114
    Toolhead, 115, 116117, 118, 119
    Z, 120
Over-extrusion, 121
Overriding temperatures, 122

P-Stop, 123
Parameters
    Acceleration, 124
    Auto-leveling, 125126
    Check SD reads, 127
    Deprime, 128129
    Ditto, 130
    Extruder count, 131
    Extruder hold, 132
    HBP installed, 133
    Home offsets, 134135
    Maximum acceleration, 136137
    Maximum speed changes, 138139
    Override gcode temperature, 140
    P-Stop, 141
    Pause with heat, 142
    RGB LED, 143144
    Serial I/O, 145
    Slowdown, 146147
    Sound, 148
    Toolhead offsets, 149150
Pause at ZPos, 151, 152
Pausing, 153
    Cold, 154
    Gcode command, 155
    Leaving heaters on, 156
    P-Stop, 157
    Specified build height, 158
Percentages, build, 159
Preheat, 160
    Off, 161
    On, 162
    Temperatures, 163
Print defects
    USB, 164
    Corner overshoot, 165
    Dualstrusion, 166
    Missing steps, 167168
    Ringing, 169
    Stepper clipping, 170
    Telegraphing, 171
Printing
    Canceling, 172
    Changing speed, 173
    Changing temperature, 174
    Changing the temperature for the heated build platform, 175
    Cold pause, 176
    Cooling fan, 177
    Current build height, 178, 179
    Ditto, 180
    Elapsed time, 181, 182
    Estimated time left, 183, 184
    Filament last used, 185
    Filament usage, 186, 187
    Last print time, 188
    Lifetime usage, 189
    Lights, 190
    Monitor screen, 191
    Overriding temperatures, 192
    ZPos, 193
    Pausing, 194
    Pausing at a set height, 195
    Preheat, 196
    Resuming, 197
    Starting a print, 198, 199
    Statistics, 200
    Ticker display, 201
Profiles, 202
    Change name, 203
    Displaying, 204

Release notes, 205
ReplicatorG
    Driver, 206
    Machine type, 207
    Obtaining, 208
    Version, 209
Requirements
    Hardware, 210
    Software, 211
Resetting the printer, 212, 213
Retraction, firmware, 214
Revision, 215
RGB LED lighting, 216
Ringing, 217

S3G, 218
Screens
    Bot statistics, 219
    Monitor mode, 220
    Print monitor, 221
    Splash, 222
    Version information, 223
SD card, 224
    CRC, 225
    Error checking, 226
    File names, 227
    Files not appearing, 228229
    Folders, 230
    Format, 231
    Missing files, 232
    Prints fail, 233
Sound, 234
Source code, 235
Stepper clipping, 236
Stepper motors, enabling, 237

Telegraphing, 238
Temperature, 239
    Ignored, 240
    Maximums, 241
    Overriding, 242
Thing-o-Matic
    Extruder controller, 243
Tool count, 244
Toolhead offsets, 245, 246247, 248, 249
    Calibrating, 250251
    Incorrect values, 252
Tramming, see Leveling
Travel move, 254, 255

Ugly cable hack, 256
Under-extrusion, 257
Updating, 258
Utilities, 259
    Bot statistics, 260
    Cooling fan power, 261
    Disable steppers, 262
    EEPROM, 263
    Enable steppers, 264
    Filament loading, 265
    Filament odometer, 266
    General settings, 267
    Home axes, 268
    Home offsets, 269
    Jog, 270
    Level build plate, 271
    Monitor mode, 272
    Preheat settings, 273
    Profiles, 274
    Restore settings, 275
    Toolhead offsets, 276
    Version information, 277

Version, 278

Waiting temperature, 279

X3G, 280

Z axis length, 281