Chapter 5
Printer Calibration

To get the best quality prints from your printer, you should invest some time in calibrating your slicing profiles to your printer. Also, if you have a printer with two extruders, you should calibrate your toolhead offsets so as to ensure good alignment in prints which use both extruders.

 5.1 Slicer Calibration
  5.1.1 Filament Diameter
  5.1.2 USB vs. SD Card
  5.1.3 Know Your Defects
  5.1.4 Calibration Box
 5.2 Dual Extruder Calibration
 5.3 JKN Advance K
 5.4 JKN Advance K2